840124900 Ev01.qxd 2/19/04 11:16 AM Page 6

Features

Blast of Steam and Spray Buttons

Push Blast Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen.

Blast Spray

Adjustable Steam Control

This control provides minimum steam for wool or maximum steam for linen. Set the control to 0 (Dry Iron) setting to iron without steam.

Auto Shutoff Reset Button/Light

 

This light comes on when the iron is

Button

first plugged in. After one hour, the

 

iron will shut off and the light will go out.

 

Push the Reset Button to turn the iron

 

back on.

 

 

Light

Power On Light

The light stays on even if Temperature Control Dial is turned to Off.

Caring and Cleaning

Iron Storage

1.The water tank of your iron should be emptied after each use. Turn Temperature Control Dial to Off. Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water tank opening.

2.After iron has completely cooled, wrap cord loosely around iron and store in an upright position. Do not store iron laying flat on soleplate.

Soleplate

1.Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate.

2.To clean occasional build-up on the soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads.

3.Always store iron upright in the heel rest position.

Self-Clean

To maintain optimum steam performance of your iron:

Rotate the adjustable steam control from 0 to 4 several times to remove debris and minerals from the steam valve.

6

7

Page 4
Image 4
Hamilton Beach 14960, 14970 manual Features, Caring and Cleaning, Iron Storage, Soleplate, Self-Clean