![](/images/new-backgrounds/1298508/2985085x1.webp)
840120200 Ev01.qxd 10/10/03 12:32 PM Page 4
Before First Use
•To clean steam vents before first use, prepare iron for steam iron- ing, then iron over an old cloth for a few minutes while letting the iron steam. Press the Blast button several times to clean the vents. Then follow the
•Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned and will stop after a few uses.
To Dry Iron
1.Plug the iron into outlet.
2. Turn Adjustable Steam Knob to
Dry Iron
.
3. Turn Temperature Control Dial to desired temperature. Allow 2 minutes for iron to reach desired temperature.
4.To turn iron Off, turn Temperature Control Dial to OFF (O) and unplug iron.
To Steam Iron
1.Unplug iron. Turn Adjustable Steam Knob to Dry Iron . Set iron upright on heel rest.
2.Using a cup, slowly pour 7 ounces of tap water into water tank opening.
Do not fill iron directly from the faucet.
3. Plug iron into outlet.
4. Turn Temperature Control Dial to desired fabric setting in the steam range.
5.Allow 2 minutes for the iron to reach desired temperature.
6.Set Adjustable Steam Knob to the recommended steam level. See the “Fabric Setting Chart.”
7.To turn iron off, set Adjustable Steam Knob to Dry Iron . Turn the Temperature Control Dial to OFF (O). Unplug iron.
8.Empty water from the iron following directions in “Caring for Your Iron.”
Water: Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
Features
Blast of Steam and Spray Buttons
Push Blast Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen.
Steam Spray
Adjustable Steam Knob
This knob provides steam for fabrics such as wool and linen. See the “Fabric Setting Chart” for details. Set the knob to the Dry Iron setting to iron without steam.
4 | 5 |