Features
Mixer Release Button
Use this feature to release the mixer from the “locked” position on the stand.
Bowl Rest™
This feature can be used on most large mixing bowls.
Use the Bowl Rest while adding ingredients or checking a recipe. To use,
TURN MIXER
OFF, then set the mixer on the edge of the bowl.
CAUTION! Pinch Hazard. Never use Bowl Rest when mixer is on.
NOTE: Do not use Bowl Rest on small (11⁄2 quart) mixing bowls or plastic mixing bowls.
QuickBurst™
Press and hold down the button for additional power at any speed.
NOTE: Never use
QuickBurst for more than two minutes at a time or motor may overheat.
Bowl Lever
Use the lever to move the turntable. This allows you to position the beaters near the edge of the bowl or in the center for better mixing performance.
Using Your Mixer
1.Always make sure mixer is unplugged and OFF before inserting beaters, using as a hand mixer or assembling on the stand.
2.Plug mixer into electrical outlet.
3.Move the speed control to desired speed, starting at 1 and increasing to a higher speed as necessary.
4.If using as a stand mixer do not leave mixer unattended. Always monitor the progress of the mixing.
5.When finished mixing, move the speed control to OFF and unplug mixer.
6.To eject beaters, push straight down on the eject
button.
7.To remove mixer from stand, hold mixer and press mixer release but- ton. Pull mixer to release from stand.
5