Using Your DrinkMaster®
BEFORE FIRST USE: Wash container and mixing shaft before using.
1.Place mixing shaft in unit by tilting 
the head back and inserting the mixing shaft until it “snaps” into place.
2.Set Control Switch to O (off). Plug into electrical outlet.
3. Place ingredients to be mixed in container.
4. Place container onto DrinkMaster, making certain that container’s top edge is behind container support and container bottom is on container rest.
5.With mixing shaft “snapped” in place, move Control Switch to desired speed to process. Start with Speed 1 (LOW) then increase to Speed 2 (HIGH) if desired.
6.For hard ice cream or very thick shakes, remove the container from the rest and support. With mixing shaft still submerged in mixture, move the container around for more thorough mixing.
7.When finished, turn unit to O (off) and tilt head up.
8.Pour contents from container and serve.
5
840119402 Ev01.indd 5 | 5/4/14 9:55 PM |
