76
Features

Auto Shutoff Reset Button/Light

This light comes on when the iron is
first plugged in. After one hour, the
iron will shut off and the light will go out.
Push the Reset Button to turn the iron
back on.

Power On Light

The light stays on even if Temperature Control Dial is turned
to Off.

Adjustable Steam Control

This control provides minimum steam
for wool or maximum steam for linen.
Set the control to 0(Dry Iron) setting
to iron without steam.
Caring and Cleaning
Iron Storage
1. The water tank of your iron should be emptied after each
use. Turn Temperature Control Dial to Off. Unplug the iron
and hold over a sink. Slowly tilt pointed end of iron down
over sink. Water will run out of water tank opening.
2. After iron has completely cooled, wrap cord loosely around
iron and store in an upright position. Do not store iron laying
flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
Self-Clean
To maintain optimum steam performance of your iron:
Rotate the adjustable steam control from 0to 4several
times to remove debris and minerals from the steam valve.

Blast of Steam and Spray Buttons

Push Blast Button for an extra blast of
steam. Push Spray Button to release a
fine spray of water for difficult wrinkles in
cotton or linen.
Blast Spray
Light
Button