3.To remove: Turn mixer off and unplug. Eject beaters or other attachments.
4.Grasp mixing shield in one hand, while holding mixer in other
hand. Pull shield straight out, then up, to remove.
5.Wash mixing shield in hot, soapy water. Rinse and dry.
Mixer Storage Case
Wipe clean with a damp, soapy cloth.
To Insert Attachments
Flat Beaters, Straight Wire Beaters and Whisk
1.Make sure mixer is unplugged and speed control is set to OFF.
2.Insert a beater or attachment into an opening on the
bottom of the mixer. Push until it clicks into place. Repeat with other beater or attachment.
Twisted Wire Beaters and Dough Hooks
1.Insert the wire beater or the dough
Collar | hook with the | |
collar into the | ||
| ||
| opening indi- | |
| cated by the | |
| illustration on | |
| the mixer. |
2.Align tabs on the beater or dough
Tab | Slot | hook with the | |
slots in the | |||
| |||
|
| opening. Push | |
|
| until it clicks | |
|
| into place. | |
|
| Repeat with | |
|
| other beater or | |
|
| dough hook. |
5
