How to Assemble and Use (cont.)
Selecting the Proper Location
To prevent the risk of personal injury or damage to the product and provide the best possible performance of your product, follow the placement guidelines below:
DO:
•Place the product on a flat, stable surface.
•Place product near an electrical outlet where it is out of the way. Make sure that the product and the cord do not present tripping hazards.
•Select a central location with adequate air circulation.
•Turn off and unplug product before moving or servicing it, or if it will not be used for several days.
•Route the electrical cord clear of furniture to prevent damage from pinching the cord.
DO NOT:
•Do not stand, sit, or place any objects
on the prod-
uct. It is not designed to support addi- tional weight.
•Do not block air intake and outlet grilles with drapes, curtains, or blinds. This may cause reduced performance.
•Do not use in cooking areas, garage, or areas with grease, oil or chemicals such as solvents or insecticides.
•Do not place on or near heat sources such as stoves, radiators, or heaters.
•To reduce electrical noise and interference, do not place on or near, or plug into the same outlet as TVs, baby monitors, or cordless phones.
•Do not place in direct sunlight as the plastic may discolor after prolonged exposure.
Using the Product
1.Before First Use: Be sure to remove all packing materials.
2.See “Replacing the Filter” for disas- sembly instructions.
Replacing the Filter
1.Turn off the product and unplug from outlet.
2.To remove intake grille, press on the grille release buttons on each side of the grille and pull outward from the top of the grille.
4
3.Remove the used filter by gripping the sides and pulling outward. Discard the used filter. It cannot be cleaned.
4.Remove any packing materials from the new filter and install with the air- flow arrow printed on the filter frame pointing into the appliance.
