![](/images/new-backgrounds/1134644/1346449x1.webp)
Features
A)Crown protector
B)
C)
D)Crown protector
E)Crown for adjustment of time and date
1)
2)
3)
4)Date
Adjusting the time
1.Unscrew the crown protector (D).
2.Pull out the crown (E) fully to position (p2).
3.Adjust the time by turning the crown in the desired direction.
4.Push the crown fully back in and screw down the crown protector (D).
Adjusting the date
1.Unscrew the crown protector (D).
2.Pull out the crown (E) to the intermediate position (p1).
3.Turn the crown clockwise until the desired date is displayed. Avoid performing this operation between 8 p.m. and 2 a.m. (2000 and 0200).
4.Push the crown fully back in and screw down the crown protector (D).
Measuring a single time with the Start-Stop function
1.Unscrew the crown protector (A) to access the chronograph buttons.
2.Press button (B): the chronograph starts.
3.Press button (B): the chronograph stops.
4.Press button (C): reset to zero.
5.After use, make sure to screw down the crown protector (A).
NB: before starting a time measurement, the hands should be reset to zero. If necessary, push button (C).
Add function
For measuring successive times
(each time is added to the previous total).
1.Unscrew the crown protector (A) to access the chronograph buttons.
2.Press button (B): the chronograph starts.
3.Press button (B) again: the chronograph stops.
4.Repeat steps 2 and 3 for as many time measurements as desired. At the end of the final step, the chronograph displays the total time, i.e. the cumulated time of all the measurements. Press button (C) to reset to zero.
5.After use, make sure to screw down the crown protector (A).
© HAMILTON 2006 / KHAKI AUTOMATIC FROGMAN |