Making Connections, Connecting to a PC | Hanns.G HI221 manual

User’s Manual

MAKING CONNECTIONS

CONNECTING TO A PC

Turn off your computer before performing the procedure below.

1.Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

2.Connect one end of the DVI-D cable (Dual input mode optional) to the back of the monitor and connect the other end to the computer’s DVI-D port.

3.Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

4.Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to the Wall outlet.

5.Turn on your monitor and computer.

Figure.2. Connecting to a PC

1.

3.

VGA Input

Audio Input

2.

4.

DVI-D Input (optional)

Power AC Input

10

Image 10

Hanns.G HI221 manual Making Connections, Connecting to a PC

Contents

Hi221 User’s Manual Canada Energy CongratulationsErgonomics Emissions Recycling Information Table of Contents Safety Notice Precautions Special Notes on LCD Monitors Checking the Contents of the Package FeaturesBefore Operating the Monitor Power Installation InstructionsInstallremove Connecting to a PC Making Connections Adjusting the Viewing Angle General Instructions Operating InstructionsControl Panel Buttons Front Panel Control Menu / Return HOW to Adjust a Settings Volume Mute DDC/CI Position Clock Phase SharpnessLanguage Position Transparency OSD TIME-OUT OSD Color Factory Reset Information Plug & Play DDC2B Feature Plug and Play Problem & Question Possible Solution Technical Support FAQFor General Problems Select PropertiesSettingsScreen Resolution. Use ƒ Cable not Connected Error Message & Possible SolutionsMode Resolution Horizontal Vertical ƒ Input not Support User’s Manual Vesa DDC2B TM SpecificationsAppendix VGA