Hanns.G HI221 user manual Power, Installation Instructions

	User’s Manual
INSTALLATION INSTRUCTIONS
Install	Remove

Figure.1. Installing and Removing the Base

INSTALLATION:

1.Align the monitor with the opening in the base.

2.Note that the longer section of the base points forward.

3.Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly.

4.Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base.

REMOVAL:

1.Flip over the monitor so that it is upside down.

2.Press the button on the arm that holds the monitor in place.

3.Gently pull the base from the monitor untill they are unattached.

POWER

POWER SOURCE:

1.Make sure that the power cord is the correct type required in your area.

2.This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3.Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to wall-outlet .

9

PDF created with pdfFactory Pro trial version www.pdffactory.com