Hanns.G HN Series user manual Error Message & Possible Solution, Factory Preset Timing Table

User’s Manual

ERROR MESSAGE & POSSIBLE SOLUTION

ƒCABLE NOT CONNECTED :

1.Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws.

2.Check the signal-cable’s connection pins for damage.

ƒINPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

FACTORY PRESET TIMING TABLE:

VIDEO MODE		RESOLUTION		HORIZONTAL
				FREQUENCY (kHz)
	VGA	640 × 480		31.469
		640 × 480		37.500
		640 × 480		37.861
		800 × 600		35.156
	SVGA	800 × 600		37.879
VESA		800 × 600		48.077
		800 × 600		46.875
	XGA	1024	× 768	48.363
		1024	× 768	56.476
		1024	× 768	60.023
	SXGA	1280	× 1024	63.981
		1280	× 1024	79.976
IBM	DOS	640 × 350		31.469
		640 × 400		31.469
		720 × 400		31.469
MAC		640 × 480		35.000
		832 × 624		49.725
		1152 × 870		68.681

VERTICAL

FREQUENCY (Hz) 59.94 75.00 72.81 56.25 60.32 72.19 75.00 60.00 70.07 75.03 60.02 75.03 70.09 70.09 70.09 66.67 74.55 75.06

19