Hanns.G JC199D user manual First Setup, Quick Installation, Connect video cable D-Sub cable

First Setup

Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories :

Power cable.

D-Sub cable (15 pin)

DVI cable (24 pin)(Optional) Audio cable.

User guide.

Quick Installation

1.Connect video cable (D-Sub cable)

Make sure both monitor and computer are powered OFF. Connect the video cable (D-Sub cable) to the computer, then to the monitor.

2.Connect DVI cable

Connect the DVI cable from DVI output of computer to the DVI input of the monitor.

3.Connect power cord

Connect the power cord to a properly grounded AC outlet, then to the monitor.

4.Power-ON computer and monitor

Power-ON the computer, then Power-ON the monitor.

5.Windows users: Setting the Timing Mode (Resolution and Refresh Rate)

Example: 1280 x 1024 @ 60 Hz

Resolution Right-click on the Windows desktop > Properties > Settings > “Desktop Area”. Set the resolution.

Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.

Example:

Power cable

D-Sub cable

2