6
Quick setup
1. Power on the computer and monitor.
2. Start the operatingsystem.
3. Insert the CD-ROM into the CD drive on your computer.The CD-ROM will automatically
execute and display the MainMenu.
4. From the MainMenu, click on the options you would like to perf orm and follow the
directions on the screen.
Troubleshooting
Problems Check items
• No video
• The powerLED
is not lit.
• Check whether the power of screen is on or not.
• Ensure the power cord is connected to screen properly.
• Ensure the power supply is normally in the outlet by tester.
• No video
• The powerLED is
orange.
• Ensure the computer is not in power save mode.
(Movemouse or hit any key to wake up the computer)
• Ensure the computer or video source equipment is on.
• Ensure the video signal cable is connected properly.
Warning:To reduce the risk of electric shock or damage to your equipment:
1. Do not disable the power cord grounding plug.The groundi ng plug is an important safety
feature.
2. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
3. Disconnect powerfro m the monitor by unplugging the power cord from the electrical outlet.