HANNspree DT12-10A1 user manual Switching Source Signals, Adjusting the Volume

Switching Source Signals

Press the SOURCE button on the remote control or the SOURCE button on the control panel to select the incoming source signal.

The current source setting CH xx appears on the top left corner of the screen; AV1 or AV2 appears on the bottom right corner of the screen.

Current source setting

inderella

C H 4 0

AV

M TV

SOURCE

TV/AV

Note:

The TV supports S-Video input in addition to normal video and audio sig- nals. The TV detects the signal type automatically and gives priority to S- video when two signals are detected at the same time. This auto detection function is only available for AV2.

Adjusting the Volume

Press the VOL UP button to increase the volume. Press the VOL DOWN button to decrease the volume. The volume level is displayed on the TV.

Press the MUTE button on the remote control to turn the sound off. The word “Mute” appears on the top left corner of the screen and sound is temporarily turned off.

inderella

Mute

M TV

Volume up Volume down

Press the MUTE button on the remote control or press the VOL UP button or

VOL DOWN button to restore the original volume.

27