|
| Assembly |
|
|
| 1. Flush pipe lines thoroughly. |
|
|
| 2. Place the mixer including the sealing washer in | |
|
| position on the basin. |
|
|
| 3. Slip the fixation piece including the washer over | |
|
| the threaded pin and tighten the nut. | |
|
| 4. Connect the supply pipes to the supply valves: | |
|
|
| |
|
| 5. Connect the | |
|
| assembly. |
|
|
| Large differences in pressure between the hot and | |
|
| cold water supply should be balanced. | |
|
| Operation |
|
|
| The mixer is actuated by pushing the lever head. | |
|
| Swivel to the left = hot water, |
|
|
| swivel to the rigth = cold water. |
|
|
| Technical Data |
|
|
| Operating pressure: | max. 147 psi |
|
| Recommended operating press.: | 14.7 - 72.5 psi |
|
| Test pressure: | 232 psi |
|
| Hot water temperature: | max. 176° F |
|
| Recommended hot water temp.: | 149° F |
|
| Hole size in deck: |
|
hot | cold | Minimum: | 1 1/4" |
Maximum: | 1 5/8" |
4