Troubleshooting
Problem | Possible Cause | Remedy |
Insufficient water | - Supply pressure inadequate | - Check water pressure (If a pump |
|
| has been installed, check to see |
|
| if the pump is working). |
| - Filters on thermostat cartridge | - Clean thermostat filters |
| dirty | - Clean screen washer between |
| - Screen washer dirty | shower and hose |
|
|
|
Crossflow, hot water being forced | - Check valves dirty or leaking | - Clean check valves, replace if |
into cold water pipe, or vice |
| necessary |
versa, when mixer is closed |
|
|
|
|
|
Output temperature does not cor- | - Handle not justified | - Justify handle |
respond with temperature set | - Hot water temperature too low | - Reset high temperature limit stop |
|
|
|
Temperature regulation not pos- | - Temperature regulator dirty or | - Clean temperature regulator, |
sible | calcified | replace if necessary |
| - Panel is | - Connect supply hoses to correct |
|
| supplies |
|
|
|
Safety stop override button not | - Spring defective | - Clean spring and/or button, re- |
operating | - Button calcified | place if necessary |
|
|
|
Diverter control stiff | - Diverter cartridge defective or | - Replace cartridge |
| dirty |
|
15
