34120XX1 | 34127XX1 |
Technical Information
Recommended water pressure | 14.7 - 72.5 psi |
Max. water pressure | 145 psi |
Recommended hot water temp. | 120� - 140� F* |
Max. hot water temp | 165�F* |
Hole size in mounting surface | 1 3/8" |
Max. mounting surface depth | 1 5/8" |
Flow rate | 2.2 gpm |
Cartridge with high temperature limit stop
3/8" supply hoses - requires 3/8" compression fitting (not included)
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Installation Considerations
•For best results, Hansgrohe recom- mends that this unit be installed by a licensed, professional plumber.
•Please read over these instructions thoroughly before beginning instal- lation. Make sure that you have all tools and supplies needed to complete the installation.
•This faucet can be used with a continuous flow water heater if the flow pressure is at least 20 psi.