HANSGROHE PRODUCT SERVICE
Assembly |
SINGLE LEVER LAV MIXER
SINGEL LEVER BIDET MIXER
SINGLE LEVER LAV MIXER Highriser
Ref. No.: 37001XX1/37200XX1/ 37020XX1/37028XX1
Installation Terrano
1.Flush pipe lines thoroughly.
2.Place the mixer including the rubber sealing washer in position on the basin.
3. Slip the mounting nut including the washer over the threaded pin and tighten the nut.
4. Connect the supply pipes to the supply valves:
5. Connect the
Operation
hot cold
Turn on by lifting handle. Swivel to the left: hot water Swivel to the right: cold water.
Large differences in pressure between the hot and cold water supply should be balanced.
Technical data
Lav mixer 37001XX1 | Bidet mixer 37200XX1 | |
Operating pressure | : max. 147 psi | Hole size in basin: |
Recommended operating pressure | : 14.7 - 72.5 psi | Minimum: 1 1/4" |
Test pressure | : 232 psi | Maximum: 1 5/8" |
Hot water temperature | : max. 176° F |
|
Recommended hot water temperature | : 149° F |
|
Lav mixer Highriser 37020XX1
Lav mixer Highriser 37028XX1 without lift rod and
11/04
