Assembly

Refer to Assembly Drawing on page 9.

1. To attach the Cup (#17), use the Clamp (#18) to connect it to the Body (#3).

Operation

Warning! Never allow the Spray Gun and Cup (#17) to lay on it’s side when the Cup (#17) is full of material.

1/4” NPS (Male)

Spray

Gun

Air Dryer

Air

Compressor

For best service, you should incorporate an air dryer, a regulator, and an inline air filter, as shown above. We recommend an air dryer to send moisture-free air to the Spray Gun. All are available at Harbor Freight Tools.

1. You will need to prepare a 1/4” air connector (sold separately) to connect to the Air Inlet (#13). First, wrap the 1/4” air connector (not included) with pipe thread seal tape before connecting to a Air Source Hose (not included).

2.Attach air hose to the Air Inlet (#13) on the Spray Gun.

3.Set the air pressure on your compressor to 50-70 PSI. Do not exceed the recommended air pressure of 70 PSI.

4.Check the air connection for leaks.

5.Turn off the compressor and disconnect the air source hose in preparation to load material.

Note: It is recommended that you test the Spray Gun on scrap material, to become familiar with the available adjustments, prior to use.

1.Remove the Cup (#17) by loosening the Clamp (#18). Place the flat end of the cup down on a flat surface. Using a funnel (not included) add no more than 1.45 Gallons of material through the small opening of the Cup (#17). Insert the opening on the top of the Body (#3) down into the open end of the Cup. Secure the Body (#3) and Cup (#17) together using Clamp (#18).

2.Connect the air hose to the Air Inlet (#13) and set the pressure to 50-70 PSI. Do not exceed

70PSI.

3.Squeeze the Trigger (#14) to test the pattern.

4.Spray from a distance of approximately four to eight inches while keeping the Spray Gun perpendicular to the ground.

5.Maintain your distance as you evenly move from side to side. Do not fan or arc the Spray Gun or the paint will apply unevenly.

6.When you finish spraying, release the Trigger (#14), and disconnect the air hose.

7.Empty the Cup (#17). Never store the Cup (#17) with paint in it.

Warning! Even after the compressor is shut down, the Cup (#17) may still be pressurized. Open it slowly and carefully.

SKU 02471

Page 5

REV 06/05

Page 4 Page 6
Page 5
Image 5
Harbor Freight Tools 02471 operating instructions Assembly, Operation
Page 4 Page 6

02471 specifications

Harbor Freight Tools 02471 is a versatile and affordable tool that has gained popularity among DIY enthusiasts and professionals alike. Known for its reliability and performance, this tool is designed to meet a variety of tasks, making it a valuable addition to any toolbox.

One of the standout features of the 02471 is its robust construction. Harbor Freight has a reputation for producing tools that can withstand heavy use, and this model is no exception. Its durable materials ensure that it can handle tough jobs, whether you are working on a home improvement project, automotive repairs, or woodworking tasks.

The 02471 boasts an ergonomic design, featuring a comfortable grip that allows for extended use without causing fatigue. This is particularly important for projects that require precision and control over long periods. The tool's lightweight build also contributes to ease of handling, making it accessible for users of all skill levels.

In terms of technology, the Harbor Freight 02471 incorporates innovative features that enhance its functionality. It includes adjustable settings, allowing users to customize their experience based on the task at hand. This adaptability is a key advantage, as it enables you to switch between different applications quickly.

Another significant aspect of the 02471 is its versatility. The tool is compatible with a range of accessories, making it suitable for various purposes. Whether you need to drill, sand, or cut, this tool can adjust to meet your specific requirements, reducing the need for multiple devices.

Safety is also a priority in the design of the 02471. It comes equipped with features that minimize risk during operation, ensuring that users can focus on their work without unnecessary concerns. This attention to safety not only protects the user but also enhances the overall performance of the tool.

In conclusion, the Harbor Freight Tools 02471 is a reliable and feature-rich tool that caters to the needs of both casual users and professionals. Its durable construction, ergonomic design, innovative technologies, and versatility make it a smart investment for anyone looking to tackle a variety of projects. With this tool in your arsenal, you can approach your tasks with confidence, knowing that you have the right equipment to get the job done effectively and efficiently.
Top Page Image Contents