SKU 31810 For technical questions, please call 1-800-444-3353. Page 5
Electromagnetic elds in close prox-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure.
WARNING: This product contains 8.
or, when used, produces a chemi-
cal known to the State of California
to cause cancer and birth defects or
other reproductive harm. (California
Health & Safety Code § 25249.5, et
seq.)
The warnings, precautions, and 9.
instructions discussed in this manual
cannot cover all possible conditions
and situations that may occur. The
operator must understand that com-
mon sense and caution are factors
which cannot be built into this prod-
uct, but must be supplied by the
operator.
Maintain labels and nameplates 10.
on the Tool. These carry important
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
SaVE THESE INSTRUCTIONS.

gROUNDINg

TO PREVENT
ELECTRIC SHOCK
aND DEaTH FROM
INCORRECT gROUNDINg
WIRE CONNECTION:
Check with a qualied
electrician if you are in doubt
as to whether the outlet is
properly grounded. Do not
modify the power cord plug
provided with the tool. Never
remove the grounding prong
from the plug. Do not use the
tool if the power cord or plug
is damaged. If damaged, have
it repaired by a service facility
before use. If the plug will not
t the outlet, have a proper
outlet installed by a qualied
electrician.

grounded Tools: Tools with Three

Prong Plugs

3-Prong Plug and Outlet
Tools marked with “Grounding Re-1.
quired” have a three wire cord and
three prong grounding plug. The
plug must be connected to a properly
grounded outlet. If the tool should
electrically malfunction or break
down, grounding provides a low
resistance path to carry electricity
away from the user, reducing the risk
of electric shock. (See 3-Prong Plug
and Outlet.)
The grounding prong in the plug is 2.
connected through the green wire in-
side the cord to the grounding system
in the tool. The green wire in the cord
must be the only wire connected to
the tool’s grounding system and must
never be attached to an electrically
“live” terminal. (See 3-Prong Plug
and Outlet.)