General Safety Rules

WARNING! Read all instructions

Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to your line-operated (corded) power tool or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1.KEEP WORK AREA CLEAN. Cluttered areas invite injuries.

.OBSERVE WORK AREA CONDITIONS. Do not use machines or power tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use elec- trically powered tools in the presence of flammable gases or liquids.

3.KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.

4.STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

.DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s capacities.

.USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attach- ment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended.

7.DRESS PROPERLY. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

8.USE EYE AND EAR PROTECTION. Always wear ANSI-approved chemical splash gog- gles when working with chemicals. Always wear ANSI-approved impact safety goggles at other times. Wear a full face shield if you are producing metal filings or wood chips.

Wear and ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.

9.DO NOT ABUSE THE POWER CORD. Do not yank it to disconnect it from the recep- tacle. Do not carry tools by the cord.

10.DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over or across running machines.

11.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer perfor- mance. Follow instructions for lubricating and changing accessories. Inspect tool cords c and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.

1. DISCONNECT POWER. Unplug when not in use, before servicing, and when changing accessories.

SKU 31877

For technical questions, please call 1-800-444-3353.

Page

Page 3
Image 3
Harbor Freight Tools 31877 operating instructions General Safety Rules