Operation
See Assembly Drawing on page 7.
1.Fit the Cover (#2) on top of the Canister (#3) so that the grooves or lips of the Canister (#3) line up and correspond to the grooves on the edge of the Cover (#2). See FIGURE 1.
Note: On the inside of the Cover (#2), underneath the Rubber Gasket (#5) is the Wire Cage Filter.
FIGURE 1
Vacuum Cleaner Hose (not included) intake | Rubber Gasket (#5) |
Ring (#1)
Grooves on Cover (#2)
Flex Pipe (#4) intake
Grooves on Canister (#3)
2.Fit the Ring (#1) onto both of lips of the Cover (#2) and Canister (#3).
3.Seal the cover by closing the ring lock and securing the locking clasp on the Ring (#1) as shown in FIGURE 2.
FIGURE 2
Locking Clasp
SKU 03394 | Page 4 | REV 02/04 |