Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
grooved, rounded, chipped, out of true or loaded with foreign material. Cracked wheels should be replaced immediately.
4.Wheel Replacement -
If you must replace a wheel be sure to obtain one with a safe rated speed at least as high as the rated RPM of this grinder. Be sure tool is switched off and unplugged before attempting repairs.
5.Bulb Replacement -
Allow bulb to cool completely before replacing it. Replace it only with a 40 W or less household bulb.
6.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
Cleaning, Maintenance, and
Lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir- ing, and any other condition that may affect its safe operation.
2.After Use, wipe external surfaces of the tool with clean cloth.
3.Care of Grinding Wheels -
As a result of normal use, grind- ing wheels may become cracked,
Bench Grinder | For technical questions, please call | Page 12 |
