Harbor Freight Tools 40089 Sku, Specifications, Description, Save this Manual

	SPECIFICATIONS
ITEM		DESCRIPTION
Body Construction		Body: Formed and Stamped Sheet Steel
Finish		Black Powder Coat
Overall Dimensions		34-1/4”H X 15-3/4”L X 12-3/8”W
Top Mounting Holes		3/8”W X 2-3/4”L (6X Slotted Holes)
Base Mounting Holes		308” Dia. (4X)
Lower Shelf		13-3.8” X 12-3/8”
Middle Shelf		12-1/8” X 12-3/8”
Top Shelf		10-5/8” X 12-3/8”
Top Dimensions		12-7/8”W X 10”L X 1-7/8”H
Overall Weight		47 Lbs.
	SAVE THIS MANUAL

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

SAFETY WARNINGS AND PRECAUTIONS

1.KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries.

2.KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA. Do not allow children to climb on this product or play around tools or supplies.

3.DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.

4.STAY ALERT. Watch what you are doing at all times. Use common sense. Do not use a Buffer or Grinder mounted on this product when you are tired or distracted.

5.CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately.

6.DO NOT MODIFY THIS PRODUCT. This product is designed to support a Grinder or Buffer. Do not modify this Cabinet in an attempt to use it for other purposes.

7.REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.

8.USE THIS PRODUCT only for its intended use, as described in this manual. Do not use attachments or modify it in any way.

9.BE SURE to use proper hardware (not included) to secure Grinder or Buffer.

NOTE: Always read and adhere to all warnings and instructions provided in the instruction manual of the buffer or grinder being used.

WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SKU 40089 PAGE 2