Charging INSTRUCTIONS

Note: All numbers referenced below refer to the parts listed on page 6 of this manual.

1.Rechargeable Shaver (1) is charged by attaching Power Cord (4) to Shaver and electrical outlet. Push the Switch (5) down. Charging Indicator Light (3) will tell you that charging is taking place.This will take 8-16 hours to charge. When fully charged, your shaver can be used about 7 days. When charge is complete, disconnect power cord.

4

3 5

2.Charging more than 16 hrs. can damage the life of the battery. Battery is sealed in Shaver casing (1) and cannot be replaced.

Operation Instructions

Take off Protective Cap (7). Push Switch (5) up. Using a soft touch to your skin, move Shaver in the opposite direction of hair growth. Stretching the skin gives you a closer

shave. Once shaving is done, push Switch down and replace Protective Cover.

Trimmer Operation

1.Flip up Trimmer (2) on back of Shaver (1).

2.At a right-angled direction, softly touch your skin where you want to trim. Work slowly.

3.When finished trimming, push Trimmer (2) back into flat position.

Cleaning / Maintenance

9 10

2

After using, clean Shaver’s Three Cutting Heads (9) with Brush (8) after removing Plastic Foil Cover (10). When clean, replace cover. Cleaning your Shaver will help keep it working at maximum efficiency. Caution: Be careful not to pinch or cut fingers when cleaning cutting heads.

SKU 40195 For technical questions, please call 1-800-444-3353.

Page

Page 4
Image 4
Harbor Freight Tools 40195 operating instructions Charging Instructions, Operation Instructions