Maintenance
CLEANING: After every use, wipe down the Log Splitter to remove any tree sap or dirt that has accumulated during use. This will extend the use of the Log Splitter. Keep machined parts lightly greased. Prevent wood, dust and debris from accumulating on the Log Splitter.
STORAGE: Childproof the machine and work area. Make sure to use padlocks (not included) and to secure the Log Splitter after operation.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT OPERATE THE TOOL.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR THE DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Unpacking
UNPACK AND CHECK CONTENTS
When unpacking your Log Splitter, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at
Parts List |
|
|
|
| |
Part # | Description | Quantity | Part # | Description | Quantity |
1A | Jack Support | 1 | 12A | Spring | 2 |
2A | Upper Frame Assembly | 2 | 13A | Support Pin 10 mm x 40 | 2 |
3A | Lower Frame Assembly | 2 | 14A | Support Pin 10 mm x 60 | 2 |
4A | Blade Assembly | 1 | 15A | Hex Head Bolt M 10 x 20 | 4 |
5A | Base Assembly | 1 | 16A | Hex Head Bolt M 10 x 50 | 4 |
6A | Hydraulic Jack | 1 | 17A | Hex Head Bolt M 10 x 60 | 6 |
7A | Supporting Plates | 2 | 18A | Hex Nut M 10 | 14 |
8A | Bushing | 2 | 19A | Jack Handle | 1 |
9A | Base Support Assembly | 1 | 20A | Hair Pin Clip 50 mm | 4 |
10A | Hex Nut M8 | 4 | 21A | Hair Pin Clip 25 mm | 1 |
11A | Hook Screw M 8 x 90 | 2 | 22A | Lock Pin | 1 |
Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
#42696 | Page 7 |
