Harbor Freight Tools 42787 Assembly, Caution!To reduce risk of health hazards

Assembly

Caution! To reduce risk of health hazards:

Before assembling the Food Slicer, thoroughly wipe off all parts with a clean rag using warm soapy water and a mild anti-bacterial detergent. In addition, the follow- ing parts should be cleaned in a dish washer: Food Pusher (3), Blade Assembly (15), and Food Tray (2).

After assembling the unit (see directions below), test the Food Slicer by running several slices of day-old bread through the Food Slicer to insure that all parts are working properly. Clean the Food Slicer after every use. Failure to follow all clean- ing instructions and warnings may result in serious illness due to food poisoning.

Your Food Slicer will require assembly prior to use. It is important that your read the entire manual to become familiar with the unit BEFORE you set up the Food Slicer. Before assembling your Food Slicer, be sure that you have all parts described in the Parts List on page 6. During Assembly, it will be helpful to refer to the Assembly Dia- gram on page 7. The Food Slicer must be cleaned, as described above, before the first use and after all subsequent uses.

Note: Before assembling your Food Slicer check for damaged parts.

Slice Thickness Gauge

Food Tray (2)

Thickness Guide

Food Pusher (3)

Safety Button (8)

On/Off Button (7)

Blade Assembly (15)

Main Body (1)

Platform (4)

Figure 1 - Set-Up

Unfold the Platform (4) from the Main Body (1). Slide the Food Pusher (3) onto the Food Tray (2). The arm of the Food Pusher fits over the fence on the Food Tray- see Figure 1. The Food Tray with the attached Food Pusher (3) slides into the slot on the Platform (4).

SKU 42787 For technical questions, please call 1-800-444-3353. Page 4