THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below:
Model_____________ | Serial No.____________ | Purchase Date_____________ |
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
| Technical Specifications |
Tool Name: | Stand, Bench Grinder Pedestal |
Item Number: | 42986 |
Stand Height: | |
Table Dimensions: | 11" x |
Table Mount Slots: | (Qty =6) 5/8" wide |
Base Dimensions: | |
Base Mount Holes: | 3/8" Diameter |
Material: | Cold Rolled Steel and Cast Iron |
Finish: | Grey Enamel Paint |
Weight: | 21.60 |
Maximum Weight Capacity: | 75 Lbs. |
Warning: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product to be used with this item, if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in parts.
Protective gloves and
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Maintain proper footing and balance at all times.
Use the right product for the job. Do not attempt to force a large tool or attachment to do the work of a smaller industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended.
#42986 | Page 2 |
