Charging Battery
The Battery does not come charged from the factory. Charge for 5 to 6 hours before using.
1.Plug the Charger cord into an electrical outlet.
2.Insert the battery (32) into the Charger Base. The battery can only insert one way.
Warning: Never charge battery more
than 12 hours Charger continuously. Charg-
ers should not be left plugged in, or charg- ing for more than 12 hours.
Battery (32)
SET Button
OFF Light
ON Light
4.Press the Set button to start the charging
The ON indicator light should come on. If it does not come on, check the power connection or try a different outlet.
5.Charge the Battery for 5 to 6 hours.
Subsequent full charges should take less time. When battery is completely charged, the Charger will automatically shut off. The ON Indicator light will turn off, and the OFF indicator will light.
6.After charging, unplug the Charger from the wall outlet.
7.Insert the Battery into the Chainsaw.
Note: the operation time of a new battery will ramp up as it is properly used and recharged.
Inserting Battery into Unit
1.Insert Battery (32) into the receptacle at the Chainsaw handle bottom. It can only fit in one way.
2.Secure the
Cutting Operation
1.Stand in front of the wood to be cut with your feet firmly in place.
2.Grasp the Rubber Cover (22) with your left hand.
SKU 44493 | Page 5 | Rev 02d |
