10.CAUTION: Some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When drilling these materials extra care should be taken to avoid inhalation and minimize skin contact.

11.ALLOW THE DRILL BIT TO SPIN UP TO FULL SPEED BEFORE DRILLING INTO THE WORKPIECE. When turning off the Drill Press, allow the drill bit to spin down and stop on its own. Do not press the drill bit against the workpiece to stop it.

12.DO NOT FORCE THE DRILL BIT INTO THE WORKPIECE WHEN DRILLING. Apply moderate downward pressure, allowing the drill bit to cut without being forced.

13.NEVER ATTEMPT TO REMOVE MATERIAL STUCK IN THE MOVING PARTS OF THE DRILL PRESS WHILE THE DRILL PRESS IS PLUGGED IN AND RUNNING.

14.THE DRILL BIT WILL BECOME HOT WHILE DRILLING. Allow the drill bit to completely cool before touching.

15.WHENEVER POSSIBLE, USE CLAMPS OR OTHER SAFE, PRACTICAL WAYS TO HOLD AND SUPPORT THE WORKPIECE. Do not attempt to drill material that does not have a flat surface, unless a suitable support is used.

16.ALWAYS DISCONNECT THE DRILL PRESS FROM ITS ELECTRICAL SUPPLY SOURCE BEFORE PERFORMING ANY SERVICES OR MAINTENANCE such as leaving the work area, moving the tool from one location to another, changing the drill bit, cleaning sawdust from the unit, etcetera.

UNPACKING

When unpacking, check to make sure all parts shown on the Parts Lists (pages 13 through 16) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed below, refer to pages 13 through 16 of this manual.

To Assemble The Drill Press:

1.To attach the Column Support (part #3A) to the Base (part #4A), use the four Hex Head Screws (part #5A) provided. (See Assembly Diagram A.)

2.To attach the Table (part #9A) to the Drill Press, insert the collar of the Table (located on the underneath) into the Table Support (part #10A). Then, lock the Table in place, using the Hex Head Screw (part 8A) and the Hex Head Socket Screw

(part 17A). (See Assembly Diagram A.)

SKU 44836

PAGE 5

Page 4 Page 6
Page 5
Image 5
Harbor Freight Tools 44836 manual Unpacking, Operating Instructions
Page 4 Page 6

44836 specifications

The Harbor Freight Tools 44836 is a highly regarded portable generator designed to meet a variety of power needs for both residential and commercial applications. With an emphasis on performance and reliability, this generator has gained popularity among DIY enthusiasts, contractors, and those seeking backup power solutions.

One of the standout features of the Harbor Freight 44836 is its impressive power output. Equipped with a robust 3500 starting watts and 3000 running watts, this generator can easily support essential household appliances, making it ideal for use during power outages. The 87cc engine contributes to the generator's efficient fuel consumption, ensuring longer run times while minimizing operational costs.

The generator is built with a durable frame, making it resilient against various outdoor conditions. Its lightweight design and compact size provide convenience in transportation and storage, which is particularly beneficial for those who require a portable solution for job sites or camping trips. Safety features are also a priority with the inclusion of low oil shut-off, which automatically turns off the engine to prevent damage and extend the life of the generator.

A key technology that enhances the performance of the Harbor Freight 44836 is its inverter system. Unlike traditional generators that produce a raw power output, this inverter generator produces clean and stable electricity, making it suitable for sensitive electronics such as laptops, smartphones, and medical devices. This feature is particularly appealing to users who need to charge their devices safely while on the go.

In terms of usability, the generator comes with easy-to-use controls, including multiple outlets that allow simultaneous operation of various devices. Additionally, the noise levels are kept to a minimum, providing a quieter operation compared to standard generators, making it suitable for neighborhoods and camping environments.

Overall, the Harbor Freight Tools 44836 offers a powerful, portable, and safe solution for those in need of reliable electrical power. Its combination of efficient fueling, clean power output, and convenient design positions it as an excellent choice for a wide range of applications. Whether you're preparing for an emergency or enjoying outdoor activities, this generator provides the peace of mind that comes with knowing you have dependable power at your fingertips.
Top Page Image Contents