SYMBOLOGY
Unpacking
When unpacking, make sure that the Battery Charger is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual.
Operation
1.Place the Battery Charger about six feet from the battery being charged.
2.If the battery to be charged is in a vehicle, verify that the ignition is off, remove vehicle’s cables from battery, then connect the positive (Red with +) Cable Clamp to the positive (+ or P) terminal of the battery.
If necessary, clean the battery terminals. Wiggle the Cable Clamp on the battery terminal to get a good connection.
3.Connect the negative (Black with
If the battery is outside the vehicle, connect the negative (black with
4.Set the Battery Charger switch to the proper setting for the type battery being charged. Refer to the table on the next page.
SKU 45005 For technical questions, please call | Page 8 |
