![](/images/new-backgrounds/1209157/2091579x1.webp)
Step 9) | Lay the Table Top Back (#6) on top of the Connecting Parts (#7). Through the inside |
| hole, insert Cross Head Bolt (#3) with Washer (#4) so that it threads down through |
| the Connecting Part (#7) and into the Check Pawl (#11) and Sliding Locking |
| Block (#13). |
Step 10) | Through the outside holes in the Table Top Back (#6), thread the Push Button (#2) |
| into the Connecting Part (#7) and into the Check Pawl (#11) and Sliding Locking |
| Block (#12). |
Step 11) | Lay the TableTop (front) (#23) onto the Threaded Sliding Blocks (#21) which are set |
| in place on the |
| Washer (#4) through the Table Top (front) and into the Threaded Sliding Blocks (#21). |
Step 12) | As necessary, attach Rubber Feet (#30) to each Leg Stand Frame. |
| Operation |
The Quick Action
Step 1) | The Table Top (front) (#23) can be moved by turning the Handles on the | ||
| Channel (#10). Turning the Handle clockwise will move the Table Top in towards the | ||
| other Table Top. Turning the Handle counterclockwise will move the Table | ||
| Top (front) (#23) out. | ||
Step 2) | Pressing on the red Push Buttons (#2) with your thumb allows you to grasp the Table | ||
| Top (back) (#6) with your hands and fingers and slide it forward or backward while | ||
| the Push Buttons (#2) are pressed down. Releasing the Push Buttons (#2) will lock | ||
| the Table into | ||
|
|
|
|
|
| Figure 5 |
|
|
|
|
|
Step 3) The Swivel Pegs (#1) and Peg Supports (#5) can be placed into any hole in the Work Table top provide a block to secure and block your workpiece.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER.THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
#47078
Page 5