Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Operation Instructions

Blade Alignment

•The Clipper comes oiled and aligned from the factory. Blades must be realigned after they have been removed for cleaning or replacement.

1.To realign blades, match the upper and lower blades teeth up, point for point. The end of the top blade teeth should be approximately 1.2mm (just under 1/16”) back from the bottom blade.

2.If blade alignment is incorrect: add a few drops of oil to the blades, turn the Clipper on for a few moments, then turn off and unplug. Loosen screws slightly and readjust. Tighten screws after blade is aligned.

•Blades should be oiled every few haircuts to maintain the Clipper in peak condition.

•Do not use hair oil, grease, or any solvent on the Clipper. The solvent will evaporate and leave a residue that can slow down the blade’s motion.

Power Screw

•The power screw, located on the side of the Clipper, allows the power level of the Clipper to be adjusted. The power screw has been pre-set at the factory, however, if the voltage in your home is low, the Clipper may need to be readjusted.

1.To adjust, use a screwdriver to turn the power screw clockwise until the arm strikes the coil. When the arm touches the coil it will begin to make noise.

2.Slowly turn power screw counterclockwise until the noise stops. This is the maximum power setting.

Note: DO NOT remove power screw.

Blade Lever

•The Blade lever allows the operator to change the closeness setting of the cut without an additional attachment comb.

•At the top position, the blades will give the closest cut and leave the hair the shortest. Pushing the lever downward increases the cutting length.

•If hair jams the blades, switch the Blade Lever up and down rapidly to clear the blades.

SKU 47082 For technical questions, please call 1-800-444-3353.

Page 4

Page 3 Page 5
Page 4
Image 4
Harbor Freight Tools 47082 Unpacking, Operation Instructions, Blade Alignment, Power Screw, Blade Lever
Page 3 Page 5

47082 specifications

Harbor Freight Tools 47082 is a high-quality, versatile pneumatic nail gun designed to simplify various woodworking and construction projects. This tool is particularly favored by both DIY enthusiasts and professionals for its efficiency, reliability, and user-friendly features.

One of the main features of the Harbor Freight Tools 47082 is its lightweight design. Weighing in at just under six pounds, it allows for prolonged use without causing excessive fatigue. The ergonomic handle is designed for comfort, providing a secure grip that enhances control and precision during operation. This is especially beneficial for tasks that require accuracy, such as framing, casing, and trim work.

The nail gun operates with a powerful pneumatic mechanism, requiring an air compressor for effective function. This setup not only streams productivity by enabling fast firing speeds but also ensures consistent performance across multiple applications. The tool is capable of driving various nail types, including brad nails and finish nails, which adds to its versatility. It can handle nail sizes ranging from 1 inch to 2.5 inches, making it suitable for a wide range of projects.

One notable technology employed in the Harbor Freight Tools 47082 is its adjustable depth control feature. This allows users to set the depth at which nails are driven, ensuring that each nail is perfectly flush with the surface material. This feature is especially useful for achieving professional-quality results on intricate woodworking projects.

Additionally, the nail gun comes equipped with a safety mechanism that prevents accidental firing, providing an added layer of safety during operation. The clear magazine design allows users to easily monitor nail levels, ensuring they can continue working without interruptions due to running out of fasteners.

Maintenance is straightforward with the Harbor Freight Tools 47082. The rear exhaust directs air away from the user, keeping the workspace clean and free from debris. Furthermore, the tool is built with durable materials that enhance its longevity, making it a reliable choice for both occasional users and those who frequently engage in demanding tasks.

In summary, the Harbor Freight Tools 47082 is an excellent pneumatic nail gun that combines a lightweight design, ergonomic features, and advanced technology to deliver exceptional performance. Its versatility and ease of use make it an ideal tool for anyone looking to tackle woodworking and construction tasks with efficiency and precision.
Top Page Image Contents