CLEANING RECOMMENDATIONS

1.Clean an inconspicuous test area to help avoid damaging the surface: Always begin with the fan spray at a distance of about 3-5 feet from the surface being cleaned to avoid damaging the surface of the object. Make sure that the test area is clear of people and water prone/delicate objects. If a pressure washing detergent is to be used, apply the detergent to this area as well. After cleaning this area, switch off the pressure washer and inspect the area carefully for any damage or discoloration. If any damage is noted from the pressure setting, use a lighter setting when cleaning the rest of the area. If damage or discoloration is noted from the detergent, do not use it when cleaning.

2.First, pass over the area with a light cleaning, and then more thoroughly clean it.

3a. For a vertical or sloped surface:

a.Wash from the top down.

b.If possible, direct the stream in the same direction as the slope towards a draining area. This will enable better drainage and therefore better cleaning.

3b. For a flat surface:

a.If a thin layer of water accumulates on the surface, periodically use the stream to direct this water towards the drainage.

b.After the major cleaning is done, sweep the surface with the stream to help direct loose debris toward the drainage.

4.If detergent is to be applied: Only use pressure washing detergent; other detergents might clog or damage the pressure washer. Apply the detergent at low pressure by using the Detergent Bottle (H). Allow the detergent several minutes to sit and soak into the work surface; this will improve cleaning efficiency. Make certain to rinse off all detergent completely.

5.Hold the Gun Assembly at about a 45° angle and steadily sweep the stream back and forth; if a severe, head-on angle is used, dirt may imbed in the surface being cleaned. Follow a steady, consistent pace during cleaning; this will help prevent stripes or discoloration afterwards. If streaking or uneven cleaning is noted at the end of a project, go over the edges of the streaks with a wide fan pattern to help blend these lighter areas in.

6.If several different surfaces are to be cleaned, be careful not to damage any of the less solid surfaces while trying to clean the harder ones. This is especially a concern when cleaning tile and grout, bricks and mortar, or stones and mortar.

7.If wood is being cleaned, be careful not to damage it. Wood will usually require resurfacing (sanding) and re-coat with a surface protectant (wood, stain, varnish) after it has dried again. Try to avoid leaving water on a wooden surface; doing so can harm the surface.

SKU 47761

For technical questions, please call 1-800-444-3353;

PAGE 16

Troubleshooting section at end of manual.

 

 

Page 15 Page 17
Page 16
Image 16
Harbor Freight Tools 47761 manual Cleaning Recommendations, 3a. For a vertical or sloped surface, 3b. For a flat surface
Page 15 Page 17

47761 specifications

Harbor Freight Tools is known for providing high-quality tools at affordable prices, and the 47761 model exemplifies this commitment. The 47761 is a versatile, compact air compressor, designed for various applications, from powering pneumatic tools to inflating tires and sports equipment.

One of the main features of the Harbor Freight Tools 47761 is its powerful 1.5 horsepower motor, which delivers an impressive maximum pressure of 125 psi. This ensures that users have enough power for demanding tasks while maintaining efficiency and performance. The compressor is equipped with a 3-gallon tank, which strikes a balance between portability and capacity, making it suitable for both home and professional use.

The compressor features a direct drive system that allows for low maintenance, as there are fewer moving parts compared to belt-driven models. Its lightweight design makes it easy to transport to job sites or store in tight spaces. Weighing in at just over 50 pounds, the 47761 is user-friendly, which is particularly beneficial during long tasks where convenience matters.

In terms of technologies, the Harbor Freight 47761 utilizes an oil-less pump. This means users do not need to worry about changing oil regularly, which can save time and resources. Additionally, the oil-less design reduces the chances of oil contamination, resulting in cleaner and safer operation.

Another significant characteristic of the 47761 is its noise level. Operating at a sound level of around 68 decibels, it is quieter than many standard compressors, providing a more pleasant working environment. An integrated pressure gauge allows for easy monitoring of the tank's pressure, enabling precision in various tasks.

The 47761 model is also equipped with overheating protection. This safety feature automatically shuts off the compressor if it becomes too hot, extending the lifespan of the unit and ensuring user safety.

Moreover, the compressor comes with a set of essential accessories, including an air hose and quick connect fittings, allowing users to start their projects immediately.

Overall, the Harbor Freight Tools 47761 is a reliable air compressor that combines power, efficiency, and ease of use, making it an excellent choice for DIY enthusiasts and professionals alike.
Top Page Image Contents