Unpacking

When unpacking, check to make sure the parts listed on pages 7 and 8 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.

Installation

Note: For intake and discharge hose locations, see FIGURE 1 on page 5.

Note: If power cords must be extended, only use no less than UL approved, 18 Gauge wire. Do not extend the wires more than 50 feet.

1.Install the pump on a rigid, level platform above the water level. This platform must provide a solid, level surface that is capable of supporting the weight of the pump, and attached piping filled with water. Never allow the pump to become immersed in water.

2.The level of the intake port should not be more than 12-15 feet above the water. Pumping efficiency falls off as the height above the water level increases.

3.Keep the vertical lift that the pump must move water before discharge at a minimum.Vertical delivery above a few feet will degrade pump efficiency.

4.The intake port must have a screen (not included) attached to prevent introduction of debris into the pump. At the end of the discharge pipe, either purchase a pre-made screen to fit, or wrap loose screen and secure with wire.

5.Lay out the intake and discharge pipes with as few turns as possible to pre- vent air pockets within the lines. Air pockets interfere with pressure switch performance.

Typical Installation

Discharge

Pump

Intake

6.Intake and discharge pipes must have

a minimum of 1” to 1-1/4” diameter. Systems with larger vertical components should have larger diameter piping. Keep in mind that the maximum vertical lift (total vertical distance from the inlet screen to the discharge outlet) is 140 feet.

7.For your protection, the power outlet used should have a Ground Fault Circuit Interrupter (GFCI). Have it installed by a qualified electrician. Keep the power line safely away from water.

8.The inlet and discharge lines should not be wedged or stressed in a way that puts strain on the pump. Do not support the pump with the inlet and discharge lines.

9.This is a self starting pump that uses a pressure switch. Once the power cord is connected, the pump can start at any time. Do not handle or perform maintenance on the pump if the power cord is plugged in.

SKU 47907

For technical questions, please call 1-800-444-3353.

Page 4

Page 3 Page 5
Page 4
Image 4
Harbor Freight Tools 47907 operating instructions Unpacking, Installation
Page 3 Page 5

47907 specifications

Harbor Freight Tools is well-known for providing high-quality tools at competitive prices, and one of its standout products is the 47907. This versatile tool offers an impressive array of features and technologies that cater to both professionals and DIY enthusiasts alike.

One of the primary features of the Harbor Freight Tools 47907 is its solidity and durability. Constructed from high-quality materials, this tool is designed to withstand the rigors of frequent use, making it suitable for various demanding applications. The robust body ensures that it can endure heavy wear and tear while still delivering consistent performance.

Another notable characteristic of the 47907 is its user-friendly design. The tool is engineered with ergonomics in mind, providing a comfortable grip that reduces fatigue during extended use. This ensures that users can operate the tool effectively without compromising on comfort, making it ideal for long tasks or projects.

The Harbor Freight Tools 47907 also boasts a range of technological enhancements that set it apart from competitors. For instance, it often features advanced safety mechanisms, such as automatic shut-off and overload protection, which prevent accidents and extend the lifespan of the tool. These safety features help to instill confidence in users, knowing that they are protected while working.

Additionally, the 47907 offers versatility in function, making it an indispensable addition to any toolbox. Whether used for tightening bolts, cutting through materials, or performing intricate assembly work, this tool can handle a variety of tasks with ease. It’s adaptable enough to be used in various fields, including automotive, woodworking, and construction.

The tool’s maintenance is also straightforward, with accessible components that allow for quick adjustments and repairs. This practicality ensures that users can keep the tool in prime condition, minimizing downtime and maximizing productivity.

In summary, the Harbor Freight Tools 47907 is a powerful and versatile tool that combines durability, user-friendly design, and advanced safety features. Its adaptability for various tasks makes it a must-have for anyone serious about their projects, from weekend warriors to seasoned professionals. With a reputation for quality and reliability, the 47907 continues to be a top choice among tool enthusiasts.
Top Page Image Contents