DUST HOOD (#3) |
|
|
OR | BLAST GATE (#2) | |
TABLE SAW DUST HOOD (#5) |
| STEEL CLAMP (#6) |
| ||
|
|
|
POWER | DUST |
|
| |
TOOL | DUST | |||
PORT | ||||
| PORT |
| ||
| FLEXIBLE HOSE (#1) |
| ||
|
|
| ||
| DUST | |||
|
| COLLECTOR | ||
| “Y” FITTING |
|
| |
TO ATTACH TO
ONE OR TWO
POWER TOOLS
FIGURE A
INSPECTION, MAINTENANCE, AND CLEANING
1.CAUTION: Prior to performing any inspection, maintenance, or cleaning on the Dust Collector Accessory Kit, make sure to disconnect the machine(s) to which the Accessory Kit is attached from its electrical power outlet.
2.BEFORE EACH USE, inspect the general condition of the Dust Collector Acces- sory Kit. Check for loose connections, misalignment or binding of moving parts, cracked, torn, or broken parts, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.
3.DAILY: With a soft brush, cloth, or vacuum, remove all debris from the Dust Collector Accessory Kit. If necessary, you may use a mild detergent.
SKU 47911 | PAGE 5 |
