Harbor Freight Tools 47927 instruction sheet Item #47926 2-1/2”Wire Cup Brush

Models: 47926 47927

1 2
Download 2 pages 31.18 Kb
Page 1
Image 1
Twisted Hardened Steel Wire Cup Brush

Twisted Hardened Steel Wire Cup Brush

Item #47926 2-1/2” Wire Cup Brush

Item #47927 3” Wire Cup Brush

Usage and Safety Warnings

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Copyright Item #47926 2-1/2” Wire Cup Brush 2002 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

Thank you for choosing a Harbor Freight Tools product! For future reference, please complete the owner’s record below:

Model:_____________________ Purchase Date:_____________________

Save the receipt and these instructions. It is important that you read this entire instruction sheet to become familiar with this product before you begin using it.

Warning: Always wear ANSI approved safety goggles, full face shield, and dust mask or respirator when working with the Wire Cup Brush.

Warning: Never exceed the recommended maximum safe speed RPM. 2-1/2” Wire Cup Brush: 12,500 Maximum RPM 3” Wire Cup Brush: 12,500 Maximum RPM

Before using the Wire Cup Brush:

1.Inspect the brush and spindle for rust, damage or other kinds of deterioration. Never use the Wire Cup Brush if damage is noted or if the brush is functioning improperly (losing filaments or is out of balance).

2.Read and understand all warnings and instructions provided in the instruction manual of the power grinder being used.

3.Make sure the maximum safe speed RPM on the Wire Cup Brush exceeds the “no load” speed of the power tool being used.

4.With the power grinder’s electrical cord unplugged, install the Wire Cup Brush securely on the power grinder.

5.The user of the power grinder, and all spectators in the work area must wear ANSI approved safety goggles, full face shields and dust masks or respirators.

#47926 / #47927

Page 1

47926 27 Wire Cup Brush man.p65

1

10/30/03, 1:14 PM

Page 1
Image 1
Harbor Freight Tools instruction sheet Item #47926 2-1/2”Wire Cup Brush, Item #47927 3” Wire Cup Brush