The Sprayer is equipped with four Spray Head (54, 55, 56, 58) types:
A.30° Double Spray Head (54): Designed for wider spray areas on short crops and the spraying of herbicides and pesticides. Move in a parallel manner on one side while spraying.
B.Fan Style Spray Head (55): Sprays evenly. Suitable for spray ing herbicides on short stalked crops. Always spray in the same direction as the wind.
C.Adjustable Spray Head (56): Designed for spraying tall crops and fruit trees and the spraying of pesticides. However, the adjustable spray head may result in significant overspray of pesticides.
D.Conical Spray Head (58):
May be used for spraying herbi- cides and pesticides. Spray in the same direction as the wind and on one side,
2.To attach a Spray Head (54, 55, 56, 58), check to make sure the Spray Head Sealing Ring (50) is properly seated in the Spray Head Nut (53).
3.Screw the desired Spray Head into the Spray Head Nut.
To Fill The Container:
4.CAUTION! Always wear eye, breath- ing, and skin protection. Wear ANSI- approved safety impact goggles,
an ANSI approved respirator, latex gloves, and proper safety clothing when using this product.
5.Prior to filling the Tank (16) of the
Sprayer with liquid, remove the Tank Cap (23) and check to make sure the Filter (21) is clear of dirt and debris.
If necessary, remove the Filter and thoroughly clean.
6.Insert the Filter back into the opening of the Tank. Fill the Tank with up to
4 gallons of liquid. CAUTION! Do not overfill the Tank. Replace Tank Cap.
7.NOTE: The Sprayer is heavy when completely filled with liquid. Always get assistance when strapping the Sprayer onto your body. If necessary, adjust the Back Belt (43) for comfort.
8.Always make sure other adults, children, and animals do not have access to the area(s) in which you intend to chemically treat.
9.Grip Handle (30) of the Spray Gun assembly firmly with your right hand.
10.With your left hand, pump Arm (11) to build up sufficient pressure in Sprayer system. Once the system is pressur- ized (as indicated by an increased tension on the Operation Arm), you may stop pumping Arm.
11.Point the Spray Head (54, 55, 56,
58) of the Spray Gun assembly to- ward the area to be sprayed. Then, squeeze the Lever (41) on the Spray Gun assembly to begin spraying.
12.As you spray, the system will begin to depressurize. When distance of spray diminishes you will need to stop spraying momentarily. Resume pumping Arm (11) to
13.To refill Tank, squeeze the Lever to completely depressurize the system.
SKU 65040 | For technical questions, please call | Page 5 |
