Tools: Tools with Two Prong
Plugs
Outlets for 2-Prong Plug
1.To reduce the risk of electric shock, double insulated equipment has a po- larized plug (one blade is wider than the other). This plug will fit in a polar- ized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See
Outlets for
Grinder Safety Warnings
For Your Own Safety Read Instruction
Manual Before Operating Grinder
1.Wear eye protection.
2.Use grinding wheel suitable for speed of grinder.
3.Replace cracked wheel immediately.
4.Always use guards and eye shields.
5.Do not overtighten wheel nut.
6.Use only flanges furnished with the grinder.
7.Adjust distance between wheel and work rest to maintain 0.125 inch or less separation as the diameter of the wheel decreases with use.
8.Frequently clean grinding dust from beneath grinder.
9.Wear a full face shield over ANSI- approved safety goggles during use.
10.Do not grind with side of wheel un- less wheel is specifically designed for that type of grinding.
11.Do not operate with ANY guard disabled, damaged, or removed. Moving guards must move freely and close in- stantly.
12.The use of accessories or attach- ments not recommended by the manufacturer may result in a risk of injury to persons.
13.When servicing use only identical replacement parts.
14.Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be
15.Industrial applications must follow OSHA guidelines.
16.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or miss- ing, contact Harbor Freight Tools for a replacement.
Page 6 | For technical questions, please call | SKU 6510 |
