tool. Distractions are able to result in the loss of control of the tool.
Personal safety
a.Stay alert. Watch what you are do- ing and use common sense when operating the tool. Do not use the tool while tired or under the influ- ence of drugs, alcohol, or medica- tion. A moment of inattention while operating the tool increases the risk of injury to persons.
b.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair increas- es risk of injury to persons as a result of being caught in moving parts.
c.Avoid unintentional starting. Be sure the switch is off before con- necting to the air supply. Do not carry the tool with your finger on the
Trigger or connect the tool to the air supply with the switch on.
d.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpect- ed situations.
e.Use safety equipment. A dust mask,
conditions. Wear
f.Always wear eye protec- tion. Wear
g.Always wear hearing protection when using the tool. Prolonged expo- sure to high intensity noise
is able to cause hearing loss.
Tool use and care
a.Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and is able to lead to loss of control.
b.Do not force the tool. Use correct tool for application. The correct tool will do the job better and safer at the rate for which the tool is designed.
c.Do not use the tool if the switch does not turn the tool on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
d.Disconnect the tool from the air source before making any adjust- ments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally. Turn off and detach the air supply, safely discharge any residual air pressure, and release the throttle and/or turn the switch to its off position before leaving the work area.
e.Store the tool when it is idle out of reach of children and other un- trained persons. A tool is dangerous in the hands of untrained users.
f.Maintain the tool with care. Keep tool sharp and clean. A properly maintained tool reduces the risk of binding and is easier to control.
SKU 65159 60 61 For technical questions, please call | Page 3 |
