Specifications
| 4V DC 2AH Sealed | |
Rechargeable Battery | Lead Acid (Included, Not | |
| Replaceable). | |
Bulb | 25W Halogen (H3 4V | |
25W) | ||
| ||
AC/DC Adaptor | Input: 120VAC 60 Hz | |
(Included) | ||
| ||
Adaptor Prongs | ||
Cigarette Lighter | 12V DC, Fuse: 2A 250V | |
Adaptor | (Included) | |
Light Output | 1 Million Candle Power |
Please Note: Spotlight will NOT operate
during charging.
Unp acking
When unpaing, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
goes out, the Spot Light is ready for use. Unplug the Adaptor.
Charging with 12V Cigarette Lighter Adaptor: Plug into any 12V DC outlet in a Automobile, boat or RV, and then into the Adaptor Plug Inlet located on the back of the Spot Light. See Figure 1.
Figure 1
Adaptor Plug Inlet
Pistol
Grip
Charge Light
Indicator
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Charging with AC/DC Adaptor:
1.Plug AC/DC Adaptor (21) into a 120V outlet.
2.Attach the end of the Adaptor cord to the Adaptor Cord Inlet, located on the back of the Spot Light. See Figure 1.
3.The Charge Light Indicator will light up. When the Charge Light Indicator
Rev 10d
4.The Charge Light Indicator will light up. When the Charge Light Indicator goes out, the Spot Light is ready for use. Unplug the Adaptor.
5.A fully charged Spot Light will give bright light for approximately 20 min- utes.
6.NOTE: Spotlight will not operate during charging.
Using the Rechargeable Spot Light:
1.Hold the Spot Light using the Pistol Grip (4).
2.Squeeze the Switch (6) located on the Trigger (8). If you want the Spot Light to stay on, push the Switch Lock (5) in while squeezing the Trig-
SKU 66691 | For technical questions, please call | Page 3 |
