SKU 66738 For technical questions, please call 1-800-444-3353. Page 9
MAINTENANCE AND SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOuS INjuRY
FROM ACCIDENTAl
OPERATION:
Turn the Calibration Knob of
the tool to its “OFF” position
and unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.

Cleaning and Maintenance

BEFORE EACH uSE,1. inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTER uSE,2. clean Bottom Sole
Plate (5) of any glue or adhesive that
may have transferred on by rubbing
on a clean scrap of carpeting while
still hot.
Place back on Iron Holder when not 3. in use.
4. WARNING! If the supply cord of
this tool is damaged, it must be re-
placed only by a qualied service
technician.