Symbols and
Specific Safety
Instructions
Symbol Definitions
Symbol | Property or statement |
PSI | Pounds per square inch of pressure |
|
|
CFM | Cubic Feet per Minute flow |
|
|
SCFM | Cubic Feet per Minute flow at |
standard conditions | |
NPT | National pipe thread, tapered |
|
|
NPS | National pipe thread, straight |
|
|
| WARNING marking concerning Risk |
| of Eye Injury. Wear |
| eye protection. |
| Warning marking concerning Risk of |
| Puncture Injury. Wear |
| work gloves. |
| Read the manual before |
| or use. |
|
|
| WARNING marking concerning Risk |
| of Hearing Loss. Wear hearing |
| protection. |
| WARNING marking concerning Risk |
| of Respiratory Injury. Wear NIOSH- |
| approved dust mask/respirator. |
| WARNING marking concerning Risk |
| of Explosion. |
|
|
Specific Safety Instructions
1.Operators and others in work area MUST wear
2.Keep fingers away from Trigger when not driving fasteners to avoid accidental firing.
3.Always assume the tool contains fasteners.
4.Do not point the tool toward yourself or anyone whether it contains fasten- ers or not.
5.Do not actuate the tool unless the tool is placed firmly against the work- piece.
6.Respect tool as a working implement.
7.No horseplay. This tool is not a toy and can be deadly if misused.
8.Do not load the tool with fasteners when any one of the operating con- trols is activated.
9.Do not remove, tamper with, or other- wise cause the tool operating controls to become inoperable.
10.Do not operate the tool if any portion of the tool operating controls is inop- erable, disconnected, altered, or not working properly.
11.Disconnect the tool from the power source when:
a.Unattended.
b.Performing any maintenance or repair.
c.Clearing a jam.
d.Moving the tool to a new location.
12.The written approval of the tool man- ufacturer must be obtained prior to making any modifications to the tool.
13.Refer to the tool maintenance instruc- tions for detailed information on the proper maintenance of the tool.
SKU 66902 | For technical questions, please call | Page 5 |