Page 5For technical questions, please call 1-800-444-3353.SKU 67118
SpeCiFiCatiONS
Electrical
Requirements 120 V~ / 60 Hz
Heat Range LO: 1000W / HI: 1500W
Settings
Off
Adjustable Heat levels: Low/High
Heat: Min/Max
hOuSehOld uSe ONlY
uNpaCKiNg
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.

Save this manual

Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
OperatiON
read the eNtire ruleS FOr
SaFe OperatiON section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
parts listed, refer to Assembly
Diagram at back of manual.
Figure 1
Power
Switch
(6)
Thermostat
(5)
Power Light (3)
Make sure the Power Switch (6) is 1.
turned to Off.
Place Heater/Fan on a sturdy, dry 2.
surface, away from any combustible
materials.
Plug into a 120V electrical outlet.3.
Turn the Power Switch to the LO 4.
(low) or HI (high) setting.
Adjust the Thermostat (5) to the 5.
desired setting between MIN
(minimum) and MAX (maximum).
The Power Light (3) turns on when 6.
the Power Switch is set to LO or HI.
When nished using the Heater/Fan, 7.
turn the Power Switch to Off and
unplug the unit.
Safety Feature: This unit is equipped
with a thermal overload protection
feature which shuts off the unit if
the temperature rises above the
highest setting. If the unit suddenly
turns off, turn the Power Switch off,
unplug the unit, wait for it to cool
completely. Once the Heater has