Harbor Freight Tools 67336 maintenance and, serVicing, Parts List & assEMBLY DiaGraM

Trimming Attachments			3. To use the Sideburns Trimming
						maintenance and
	This unit comes with two Trimming		Attachment:				serVicing
	Attachments: a narrow tool for		Using a mirror (sold separately),				Procedures not specifically
	trimming nose hairs and ear hairs,		press the trimmer gently against
	and a wide attachment for trimming		your face where you want to trim				explained in this manual
	sideburns.		your sideburn, then slowly slide it				must be performed only by a
1.	To remove a Trimming Attachment:		down the side of your face, trimming				qualified technician.
			excess hair. Repeat as needed.					to preVent
	Rotate the Trimming Attachment
			CAUTION: Use only on facial hair.					serious injurY
	counter clockwise, then pull it off the						From accidental
	top of the Trimmer Body.		4. To prevent accidents, turn off the tool				operation:
2.	To clean a Trimming Attachment:		after use. Clean, then store the tool				slide the switch to the off
			indoors out of children’s reach.				position (toward the Battery
	Use the Cleaning Brush, or clean		CAUTION: Do not insert the Trimmer				cover) before performing any
	in warm water and mild detergent.						inspection, maintenance, or
			further into your nostril or ear than the
	Air dry the Attachment completely if						cleaning procedures.
			narrow tip on the outer blade. Do not
	cleaning with water.
			press the Trimmer forcefully into your				to preVent serious
CAUTION: The Trimmer is not waterproof			nostril or ear. For facial hair only.				injurY From tool
	and is not intended to be submerged		Do not attempt to use the Trimmer				Failure:
	or rinsed, with the exception of the						do not use damaged
			if any part of the blade appears
	removable Trimming Attachments.						equipment. if abnormal noise
			damaged. Injury to the nostril or ear
							or vibration occurs, have the
3. To install a Trimming Attachment:			might occur.
							problem corrected before
	a. Line up the tabs on the inside of the						further use.
	Attachment with the Alignment Slot
	on the Trimmer Body.					cleaning and maintenance
	b. Slide the Attachment onto the Body				1. BeFore eacH use, inspect the
	and rotate clockwise to lock in place.
						general condition of the tool. Check
						for loose hardware, misalignment or
	General Operating Instructions					binding of moving parts, cracked or
1.	Turn the Trimmer on by sliding the					broken parts and any other condition
						that may affect its safe operation.
	Switch (27) toward the Trimming
	Attachment.				2. aFter use, wipe external surfaces
2.	To use the Nose Trimming					with a clean cloth. Remove and
						clean the Trimming Attachment (See
	Attachment:
						Trimming Attachments - Page 5). Let
	a. Using a mirror (sold separately),
						air dry completely.
	slowly and carefully insert the tip of				3. If storing the tool for a long period
	the Nose Hair Trimming Attachment
	into your nostril or ear hole.					of time, remove the battery. Dispose
	b. Slowly move the Trimmer as needed					of spent batteries according to local,
						state and federal regulations.
	to trim hair.
SKU 67336		For technical questions, please call 1-800-444-3353.		Page 5	Page 6		For technical questions, please call 1-800-444-3353.		SKU 67336

	PLEASE READ THE FOLLOWING CAREFULLY
			Parts List & assEMBLY DiaGraM
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEMBLy
DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR		Part	Description	Qty	Part	Description	Qty
		1	Blade cover	1	15	Nose Hair Blade Holder	1
DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT
		2	Sideburns fixing blade	1	16	Small blade tube	1
HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
		3	Sideburns moving blade	1	17	Swinging head	1
qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
		4	Pressure plate	1	18	Blade holder core	1
OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
		5	Spring	1	19	Body back	1
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE
		6	Sideburns blade	1	20	Motor	1
BUyER ASSUMES ALL RISK AND LIABILITy ARISINg OUT OF HIS OR HER REPAIRS TO THE
		7	Sideburns Blade holder	1	21	Contact plate(+)	1
ORIgINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISINg OUT OF HIS OR HER
		8	Oscillator	1	22	Cover plate	1
INSTALLATION OF REPLACEMENT PARTS THERETO.
		9	Cap	1	23	Battery Cover	1
		10	Blade base	1	24	Contact plate(-)	1
		11	Big blade tube	1	25	Body front	1
		12	Nose Hair Blade holder	1	26	Switch plate	1
		13	Small moving blade	1	27	Switch	1
		14	Small fixing blade	1

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.

SKU 67336 For technical questions, please call 1-800-444-3353. Page 7

Page 8 For technical questions, please call 1-800-444-3353. SKU 67336