5.Do not leave the compressor unattended for an extended period while plugged in. Unplug the compressor after working.
6.Keep compressor
7.Drain Tank daily and after use. Internal rust causes tank failure and explosion.
8.Do not remove the valve cover or adjust internal components.
9.Compressor head gets hot during operation. Do not touch it or allow children nearby during or immediately following operation.
10.Do not use the air hose to move the compressor.
11.Release the pressure in the storage tank before moving.
12.The use of accessories or attachments not recommended by the manufacturer may result in a risk of injury to persons.
13.All air line components, including hoses, pipe, connectors, filters, etc., must be rated for a minimum working pressure of 150 PSI, or 150% of the maximum system pressure, whichever is greater.
14.USE OF AN EXTENSION CORD IS NOT RECOMMENDED. If you choose to use an extension cord, use the following guidelines:
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS
(120 VOLT)
NAMEPLATE | EXTENSION CORD | |||
AMPERES |
| LENGTH |
| |
(at full load) | 25’ | 50’ | 100’ | 150’ |
0 – 6 | 18 | 16 | 16 | 14 |
6.1 – 10 | 18 | 16 | Do not use. | |
10.1 – 12 | 16 | 16 | Do not use. | |
12.1 – 16 | 14 | 12 | Do not use. | |
TABLE A |
|
|
|
|
a. Make sure your extension cord is in good condition.
b. Use an extension cord which is heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table A shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
15.Industrial applications must follow OSHA guidelines.
16.Maintain labels and nameplates on the compressor. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
17.This product is not a toy. Keep it out of reach of children.
18.People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
19.WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause
Page 4 | For technical questions, please call | SKU 67696 |
|
| 68149 |
