Page 3For technical questions, please call 1‑800‑444‑3353.SKU 68152
for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure
the switch is in the off‑position before
connecting to air source, picking up
or carrying the tool. Carrying the air
tool with your nger on the switch or
energizing power tools that have the
switch on invites accidents.
d. Remove any adjusting key or
wrench before turning the air tool
on. A wrench or a key left attached to a
rotating part of the air tool may result in
personal injury.
e. Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the air tool in
unexpected situations.
f. Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
g. If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
these devices can reduce dust-related
hazards.
h. Only use safety equipment that has
been approved by an appropriate
standards agency. Unapproved safety
equipment may not provide adequate
protection.
3. Air tool use and care
a. Do not force the air tool. Use the
correct air tool for your application.
The correct air tool will do the job better
and safer at the rate for which it was
designed.
b. Do not use the air tool if the switch
does not turn it on and off. Any air tool
that cannot be controlled with the switch
is dangerous and must be repaired.
c. Store idle air tools out of the reach
of children and do not allow persons
unfamiliar with the air tool or these
instructions to operate the air tool.
Air tools are dangerous in the hands of
untrained users.
d. Maintain air tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
air tool’s operation. If damaged,
have the air tool repaired before use.
Many accidents are caused by poorly
maintained air tools.
e. Use the air tool, accessories and tool
bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the air tool for
operations different from those intended
could result in a hazardous situation.
4. Service
a. Have your air tool serviced by a
qualied repair person using only
identical replacement parts. This will
ensure that the safety of the air tool is
maintained.

Air source

a. Never connect to an air
source that is capable of
exceeding 200 psi. Over
pressurizing the tool may
cause bursting, abnormal operation,
breakage of the tool or serious injury to
persons. Use only clean, dry, regulated
compressed air at the rated pressure or
within the rated pressure range as
marked on the tool. Always verify prior to
using the tool that the air source has
been adjusted to the rated air pressure
or within the rated air-pressure range.