Adjusting the Cutting Depth

1	Place the router on a flat wood
	surface. Unlock the Lock Lever (30).

Lock Lever

(30)

2	Rotate the Main Housing until the
	tip of the bit touches the workpiece

surface. Lock the Lock Lever.

Main

Housing

(5)

Spindle

3	Slide the Scale Ring until the “0” aligns with
	the index line (vertical mark) on the Main

Housing. Unlock the Lock Lever. Each line on the scale raises or lowers the bit by 1/64".

Index Line

(vertical mark on

Main Housing)

Scale Ring

4	While holding the Base up from the
	surface, rotate the Main Housing to

raise or lower the bit until the index line on the housing aligns with the desired depth on the scale ring. Lock the Lock Lever.

Lock Lever

(30)

Attaching Guide

To attach the Guide (24) when making straight cuts:

1. Loosen the four Wing Nuts (27 and 37).

Guide (24)

Wing

Nuts (37)

2.	Slide the Guide Poles (28) on the Guide (24)
	into the slots on the Base of the Router
	with the Guide facing the workpiece.
3.	Adjust the distance between the router bit
	and the Guide to the desired setting.
4.	Tighten the Wing Nuts (27 and 37).

Wing Nuts (27)

Base

(45)

Guide Poles (28)

SKU 68341

For technical questions, please call 1-800-444-3353.

Page 9