Harbor Freight Tools 69034 To Prevent Serious Injury, Roof Assembly, Safety, Maintenance

SAFETY

Assembly

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

TO PREVENT SERIOUS INJURY:

Do not leave this product partially assembled. Assemble this product completely at one time.

Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 10.

Note: Much of this product’s assembly is done using slip fit construction. Make sure all parts seat completely and securely. A rubber mallet (sold separately) can be used to gently tap parts in place to ensure a tight fit.

ASSEMBLY

5		2		4
					2
						6		2
										4
											2
													5
	2
									2
			3
				5						3				2
					2									3
							4		2
										6				5
												2
													4
														2

Figure 1: Roof Assembly - 1

1.Assemble one half of the roof using 11x Swaged Tubes (2), 3x Rafter Tubes (3),

4x Straight Cross Tubes (4), 4x 3‑Way Connectors (5), and 2x 4‑Way Connectors (6).

Align the 3- and 4-Way Connectors so that the free ends are all on the same side of the assembly, as shown in Figure 1.

MAINTENANCE

		5					6
		2				2	5
		3
							2
					3
5	2
		4
							3
		2	6	2
					4
						2	5

Figure 2: Roof Assembly - 2

2.Connect a Swaged Tube (2) to each 3- and 4-Way Connector (5,6) at the top of the roof. Connect a Rafter Tube (3) to the end of each Swaged Tube (2).

Connect 4x Swaged Tubes (2), 2x Straight Cross Tubes (4), 2x 3‑Way Connectors (5), and

1x 4‑Way Connector (6) together, then attach that assembly to the ends of the Rafter Tubes (3).

Page 4 For technical questions, please call 1-800-444-3353. Item 69034