SAFETY

Checking and Filling Fuel

WARNING! TO PREVENT SERIOUS

INJURY FROM FIRE:

Fill the fuel tank in a well-ventilated area away from ignition sources. If the engine is hot from use, shut the engine off and wait for it to cool before adding fuel.

Do not smoke.

1.Clean the Fuel Cap and the area around it.

2.Unscrew and remove the Fuel Cap.

3.If needed, fill the Fuel Tank to about 1″ under the fill neck of the Fuel Tank with 87 octane or higher unleaded gasoline.

Note: Do not use gasoline containing more than 10% ethanol (E10). Do not use E85 ethanol.

Engine Oil Change

CAUTION! Oil is very hot during operation and can cause burns. Wait for engine to cool before changing oil.

1.Make sure the engine is stopped and is level.

2.Close the Fuel Valve.

3.Place a drain pan (not included) underneath the crankcase’s drain plug.

4.Remove the drain plug and, if possible, tilt the crankcase slightly to help drain the oil out. Recycle used oil.

5.Replace the drain plug and tighten it.

6.Clean the top of the Dipstick and the area around it. Remove the Dipstick by threading it counterclockwise, and wipe it off with a clean lint free rag.

Note: Do not use gasoline that has been stored in a metal fuel container or a dirty fuel container. It can cause particles to enter the carburetor, affecting engine performance and/or causing damage.

Full level

Full level

SETUP

OPERATION

4.Then replace the Fuel Cap.

5.Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air.

7.Add the appropriate type of oil until the oil level is at the full level. SAE 10W‑30 oil is recommended for general use.

The SAE Viscosity Grade chart shows other viscosities to use in different average temperatures.

SAE Viscosity Grades

30

10W-30

5W-30

-20 0 20 40 60 80 100°F

Average outdoor temperature

8. Thread the dipstick back in clockwise.

CAUTION! Do not run the engine with too little oil. The engine will be permanently damaged.

MAINTENANCE

Page 14

For technical questions, please call 1-800-520-0882.

ITEM 69774

Page 13 Page 15
Page 14
Image 14
Harbor Freight Tools 69774 manual Checking and Filling Fuel, Engine Oil Change
Page 13 Page 15

69774 specifications

Harbor Freight Tools has carved a niche in the world of affordable yet reliable tools, and the 69774 model is no exception. This all-in-one tool cart appeals to both amateur and professional users seeking efficient organization for their tools. One of the main features of the Harbor Freight Tools 69774 is its sturdy construction. Made from durable steel, this tool cart offers exceptional longevity, ensuring it can withstand the rigors of a busy workshop or garage environment.

Additionally, the 69774 model comes equipped with a powder-coated finish that resists rust and corrosion, allowing it to maintain its aesthetic appeal and functionality over time. The tool cart features a spacious work surface made from hard rubber, providing ample workspace for various projects. This hard rubber surface not only offers a solid platform but also enhances grip, reducing the chances of slipping during use.

The 69774 model includes an ergonomic handle that facilitates easy maneuverability, making it convenient to move the cart around the workplace. With four durable swivel casters, which include locking mechanisms, the cart offers stability and flexibility, enabling users to secure it in place when needed.

Storage capacity is a top priority for the Harbor Freight Tools 69774, and this cart does not disappoint. It comes with multiple drawers, providing ample space for organizing hand tools, power tools, and accessories. The drawers are ball-bearing slides, ensuring smooth opening and closing, even when fully loaded.

Another noteworthy characteristic is the presence of side trays, which offer additional convenience, allowing users to have essential tools readily available. The integrated power strip with multiple outlets is a significant technological advantage of this model, enabling users to plug in various tools and devices without the need for additional power sources.

In summary, the Harbor Freight Tools 69774 tool cart is an exemplary piece of equipment designed with durability, functionality, and user convenience in mind. With its robust construction, ample storage, and innovative features, this tool cart is ideal for anyone looking to streamline their tool organization and improve their workspace efficiency. Whether for professional trades or DIY enthusiasts, the 69774 is a valuable addition to any toolkit.
Top Page Image Contents